Filter
Top Products
10
14. Press two 56mm Round Inner Caps (71) into the
ends of the Left and Right Arms (8, 9). Slide four
Long Handgrips (40) onto the Arms. Press four
31mm Round Inner Caps (50) into the Arms.
Press two Large Support Rod Bushings (66) into
the Press Bracket (10).
Orient the Left and Right Arms (8, 9) and the
Press Bracket (10) as shown. Attach the Arms to
the Press Bracket with four M10 x 75mm Bolts
(99), four M10 Washers (89), and four M10 Nylon
Locknuts (93).
13. Attach the Press Frame (12) to the Press Top
Frame (13) with a Long Support Rod (59), two
38mm Large Washers (81), and two M10 x 25mm
Bolts (82).
13
14
15. Pull the Knob w/ Threads (106) out as far as it will
go. Align a hole in the Press Bracket (10) with the
Knob, and engage the Knob into the hole.
Attach the Press Bracket (10) to the Press Frame
(12) with a Long Support Rod (59), two 38mm
Large Washers (81), and two M10 x 25mm Bolts
(82).
15
13
12
59
81
81
82
82
93
66
66
10
9
8
40
40
40
40
71
71
99
89
82
81
81
82
59
106
10
12
Arm Assembly
12. Press four 40mm x 50mm Inner Caps (67) into
the Press Frame (12). Press eight Large Support
Rod Bushings (66) into the Press Frame.
Attach the Ball w/Threads (106), the Spring (107),
and the 14mm Pin (56) to the Press Frame (12)
as shown.
12
67
67
67
66
66
12
66
66
66
106
107
56
66
50
50
50
50