Filter
Top Products
22
The scope or the
IR illuminator do not
turn off via the selector
switch on the scope.
The scope is turned on
via the remote control.
Turn off the scope and
the IR illuminator using
the remote control.
The aiming point shifts
after firing rounds.
The riflescope is not
mounted securely.
Check how securely the
riflescope has been
mounted and make sure
that the same type and
caliber bullets are being
used as when the scope
was initially sighted in;
if your scope was
sighted in during the
summer, and is now
being used in the winter
(or the other way
around), a small
displacement of the
aiming point is possible.
The riflescope does not
focus.
Wrong settings. Adjust the riflescope
according tothe
instructions given in the
section, entitled
“OPERATING
INSTRUCTIONS” and
check the surfaces of the
eyepiece and objective
lenses and clean them if
necessary from dust,
condensation, frost, etc;
to prevent fogging in
cold weather, apply a
special anti-fog solution.