Filter
Top Products
18
11. TECHNICAL MAINTENANCE
Technical maintenance should be done no less than twice a year,
and is comprised in the following steps:
Clean the outside metallic and plastic surfaces from dust,
dirt and moisture; wipe the scope with a soft cotton tissue,
lightly coating it with gun oil or petroleum jelly.
Clean the battery compartment's electric contact points
using an oil-free solvent.
Inspect the eyepiece lens, the objective lens and the IR
illuminator and gently blow off any dust and sand, and
clean using lens cleaner and a soft cloth; see section
entitled “GUIDELINES FOR OPERATION”.
12. USING THE ADDITIONAL
WEAVER RAIL
The scope has a built-in additional weaver rail mount (14)
housed on the left portion of the body. This will allow the mount
of additional devices, such as:
IR75, LAM 10, LAM 2, LAM 3