Filter
Top Products
11
Turn the knob of the IR illuminator (8) until you get a
focused IR spot.
After making these adjustments, no further tuning of the
diopter is required, regardless of distance or other factors;
perfect the image quality using only the knob for the
objective lens (6) and that for the IR illuminator (8).
When finished, turn off the riflescope by turning the
selector switch (3) to the “OFF” position and close the
objective lens cap (2).
It is possible to mount the scope onto the firearm using a
special bracket (9); after the initial mounting is performed,
it is important to follow further mounting instructions in the
section entitled “SIGHTING DN463”.
The riflescope can be turned on instantaneously with either
the remote control housed in its bracket (10) or by button
(11).