Filter
Top Products
13
Using live ammunition, take 3 or 4 control shots,
continually aiming at the same hit point on the target
(you may also use a laser bore sighter and align the
laser point to the center of the cross hairs).
Examine the target and determine if the aiming point
coincides with point of impact, if you determine it's
necessary to make corrections, you will need to
adjust your aiming point. To move it downwards and
to the left, turn the knob (13) counter clockwise, in
the directions Down and Left respectively, the aiming
point moves upwards and to the right; keep in mind
that one click of the knob corresponds to a 12mm
shift of the hit point at a distance of 100m.
Check the accuracy of your adjustments by firing
another 3 or 4 control shots.
The scope should now be zeroed-in for the specified
distance.