Filter
Top Products
27
24
25
0
I
II
26
23
V
R
27
Operation:
6.4 Vibration
When travelling with vibration, in addition to travel levers „SL“ and „SR“,
the switching lever „SV“ is actuated (Fig. 23). In the central position, vibration is switched off, in position „V“ forwards
or „R“ reverse.
Remark:
When working on even terrain, the switch position of the vibration lever „ V „ or „ R „ is not important.
However, if the machine has to negotiate an incline, the vibration switching lever must be switched to the
direction of travel in order to increase the machine‘s climbing ability.
6.5 Switching off the machine
1. Move the switches „FL“, „FR“, „V“ and „E“ to their middle / off position (Fig. 25).
2. Move the throttle lever „GH“ to position „0“ (Fig. 24).
3. Turn the ignition switch to position „0“ (Fig. 26).
Note:
After switching off the machine, the ignition key must be removed.