Filter
Top Products
26
22
FL FRV
E SN
26
Operation:
5.7 Switching off the machine
1. Move the switches „FL“, „FR“, „V“ and „E“ to their central position / switch off (Fig. 22).
2. Press the Start/Stop switch „S“ to the right and hold there until the engine comes to a complete standstill.
3. Actuate the emergency stop switch „N“ by pressing down. (Fig. 22)
Note:
After switching off the machine, the ignition key must be removed.
6.0 Manual control
Note:
All safety conditions from Section 5.0 Operation with remote control must be observed when working with manual
control!
6.1 Starting process
When starting the engine, the starting conditions of the engine manufacturer must be observed.
1. Fill with fuel (see Maintenance section 9.06)
2. Move the throttle lever to position „I“ (Fig. 17).
3. All switching levers must be in the neutral position (Fig. 18).
4. Turn the ignition switch to the position „I“ (Fig. 24). Oil pressure warning light „ÖK“ and battery charge indicator light
„LK“ light up.
6.2 Travel operation
Push both travel levers „SL“ and „SR“ to the front.
The machine begins to travel forwards. For reverse travel, pull both travel levers backwards.
To steer to the side, the travel levers are moved in the opposite directions (turning on the spot).
6.3 High speed
Push the switch lever „SE“ forwards. The functional is the same as for the work mode..
Note:
The machine travels twice as fast in „high speed“ mode as in the working mode!