Filter
Top Products
1111
Specifi cations:
1.2 Noise and vibration specifi cations
The noise and vibration specifi cations listed below in accordance with the EC Machine Directive in the draft
(93/68/EEC) were determined under operating conditions typical for the machinery in question with vibration
over a specifi ed travel surface (DIN 45635).
In operational application, deviating values may result depending on the prevailing operating conditions.
Noise specifi cation
The noise emission specifi cation stipulated in accordance with Annex 1, Section 1.7.4.f of the EC
Machine Directive is as follows:
- Sound pressure level at the operator position: LpA = 86.9 dB(A)
- Sound power level: LWA = 102.7 dB(A)
These noise emission values were determined in accordance with ISO 6081 for the sound pressure
level (LpA) and ISO 3744, DIN 45635, for the sound power level (LWA).
Vibration specifi cation
The vibration specifi cations stipulated in accordance with Annex 1, Section 2.2 / 3.6.3. a of the EC
Machine Directive are as follows:
Hand-arm vibration values
The weighted effective acceleration value, determined in accordance with ISO 8662 Part 1, DIN
45675, Part 9, is approx. 10.3 m/sec˛.
Technical modifi cations reserved
Rammax RW 1504