Filter
Top Products
46
6 S
ERVICE AND
TECHNICAL DATA
6.1 PREVENTIVE MAINTENANCE TIPS
The Total Body Trainer is backed by the engineering excellence of Life Fitness and is one of the
most rugged and trouble-free pieces of exercise equipment on the market today. Commercial
Life Fitness products have proven to be durable in health clubs, colleges, and military facilities
the world over. This same technology, engineering expertise, and reliability have gone into the
Total Body Trainer.
NOTE: The safety of the equipment can be maintained only if the equipment is examined regu-
larly for damage or wear. Keep the equipment out of use until defective parts are repaired or
replaced. Pay special attention to parts that are subject to wear as outlined in the Preventive
Maintenance Schedule.
REMARQUE : pour conserver un matériel sûr, il convient de l'inspecter régulièrement afin de
déceler tout signe d'usure ou d'endommagement. N'utilisez pas l'appareil tant que les pièces
défectueuses n'ont pas été réparées ou remplacées. Portez une attention toute particulière aux
pièces qui s'usent, comme indiqué ci-dessous.
The following preventive maintenance tips will keep your Total Body Trainer operating at peak
performance:
• Locate the Total Body Trainer in a cool, dry place.
• Clean the top surface of the pedals regularly.
• Keep the display console free of fingerprints and salt build-up caused by sweat.
• Use a 100% cotton cloth, lightly moistened with water and mild liquid detergent, to clean the
Total Body Trainer. Other fabrics, including paper towels, may scratch the surface. Do not
use ammonia, chlorine, or acid-based cleaners.
• Long fingernails may damage or scratch the surface of the console; use the pad of the fin-
ger to press the selection buttons on the console.
• Clean the housing and moving arms thoroughly on a regular basis.
NOTE: When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are
strongly recommended. At no time should cleaner be applied directly to any part of the equip-
ment; apply the non-abrasive cleaner on a soft cloth and then wipe the unit.