Filter
Top Products
36
CREATE YOUR OWN (DEFAULT:ENABLED)
The manager can enable or disable the Create Your Own workout feature.
PROGRAM TIMEOUT (DEFAULT: 60 SECONDS)
Sets the amount of time the user can go without touching the Touchscreen while setting up their workout, before the
console resets back to the Home Screen. Program Timeout can be set from 20 to 255 seconds.
FIT TEST (DEFAULT:ENABLED)
Choose OFF to disable the Life Fitness Fit Test.
MARATHON MODE (DEFAULT:DISABLED)
Marathon Mode has no preset or settable goal. It allows the user to workout indefinitely. If enabled, a workout in
Marathon Mode ends only if the user chooses to end it or a stop system is activated.
SYSTEM BEEPS (DEFAULT:ON)
The System Beeps Configuration allows the manager to disable the beeping sound.
PAUSE T
IME (DEFAULT:ONE MINUTE)
Managers can adjust the Pause Time from 1 to 99 minutes.
TELEMETRY (DEFAULT:ENABLED)
The telemetry feature makes it possible to use the Polar®-compatible Heart Rate Zone Training exercise chest strap for
monitoring the heart rate.
VIRTUAL TRAINER (DEFAULT:ON)
The Virtual Trainer feature makes it possible for a male or female face to appear on the integrated LCD screen and
advise the user on every aspect of the workout.
NETWORK (DEFAULT:VIVO)
Managers can select from the following options: Vivo, Other (network), and None.
AUDIO CUES MANAGER CONFIGURATION
The Audio Cues Manager Configuration allows the manager to enable or disable the Audio Cues feature.
3) TV / FM R
ADIO
Brings up TV / FM Radio configuration screen, which is used to set and customize TV and FM radio reception options.
TV SETUP
Opens the TV Setup screen allowing adjustment of brightness, contrast, saturation, and hue. Also allows choice of TV
format and channel setup.
• To Set Up Channels: select Channel Setup; Auto, Start.
Audio Only option: Allows only the TV audio to be heard. TV video is disabled.
• To Delete an Unwanted Channel: Choose Channel Setup; Manual, use the Channel Controls to choose the chan-
nel to be deleted, select delete, return the Channel Setup to Auto.
• To Restore a Channel: Choose Channel Setup, Manual; use the Channel Controls to choose the channel to be
restored, select Add, return the Channel Setup to Auto.
• To Adjust Picture Setup: Brightness, Contrast, Saturation, and Hue can be adjusted by using the corresponding
arrow buttons. To return to the unit defaults, select Default.
Max Volume Setup: Opens the Max Volume controls. (Headphones must be used for this function.) The upper set
of arrows adjusts the volume capacity higher or lower, allowing clubs to compensate for average noise levels within.
The maximum volume returns to this default after each workout.
The Volume Down, Volume Up arrows control the volume of the unit for the current usage. After each session ends,
the unit resets to a mid-range volume corresponding to the maximum volume set up.
TV Format: Opens the TV Format window. Choose the appropriate country, TV format (NTSC-M, PAL-I, PAL-B/G,
SECAM-L), and Audio format (M-Korea, B/G FM, D/K1, D/K2, D/K Mono HDEV3, D/K3, B/G NICAM, L NICAM-AM, I
NICAM, D/K NICAM, D/K NICAM HDEV2, D/K NICAM HDEV3, BTSC-Stereo) from the provided listings. Select OK
to accept the settings.