Filter
Top Products
31
6 S
ERVICE AND TECHNICAL DATA
6.1 P
REVENTIVE MAINTENANCE TIPS
The Life Fitness treadmill is backed by the engineering excellence and reliability of Life Fitness
and is one of the most rugged and trouble-free pieces of exercise equipment on the market
today. Commercial Life Fitness treadmills are among the most popular of aerobic trainers,
regularly standing up to marathon use - 18 hours a day, seven days a week - in health clubs,
colleges and military facilities the world over.
NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly
for damage or wear. Keep the equipment out of use until defective parts are repaired or
replaced. Pay special attention to parts that are subject to wear, as outlined below.
REMARQUE : pour conserver un matériel sûr, il convient de l'inspecter régulièrement afin de
déceler tout signe d'usure ou d'endommagement. N'utilisez pas l'appareil tant que les pièces
défectueuses n'ont pas été réparées ou remplacées. Portez une attention toute particulière aux
pièces qui s'usent, comme indiqué ci-dessous..
The following preventive maintenance tips will keep the Life Fitness treadmill operating at peak
performance:
• Clean the display console and all exterior surfaces regularly with mild soap and water or a
mild household cleaner. DO NOT use paper towels, ammonia or acid based cleaners.*
• Check operation of the emergency stop system once a week.
• Check the operation of the stop button once a week.
• Inspect and vacuum the area under unit regularly.
• Vacuum around the striding belt regularly to keep debris from accumulating.
• Inspect exterior parts regularly for wear, particularly the striding belt and deck.
• Check the position (centering) of the striding belt.
The optimum operating position of the striding belt is from 1.5 inches (38 mm) to 2.0 inches
(51 mm) from either side of the frame. If the striding belt travels beyond this position, see sec-
tion 6.5, titled How to Adjust and Tension the Striding Belt, or contact Life Fitness Customer
Support Services, for proper alignment instructions, 1-800-351-3737 (USA). See section 6.6,
titled How to Obtain Product Service for customer support outside of the United States.
*NOTE: When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are
strongly recommended. At no time should cleaner be applied directly to any part of the equip-
ment; use non-abrasive cleaner on a soft cloth and then wipe the unit.