Filter
Top Products
9
1.2 S
ETUP
Read the Operation Manual before setting up the Life Fitness treadmill. Place the treadmill
where it will be used before beginning the setup procedure.
ELECTRICAL POWER REQUIREMENTS
The Life Fitness treadmill is intended for use on a normal 120-Volt electrical circuit in the United
States and Canada. The following table provides the current rating for this product based on
supply voltage. Make sure that this treadmill model supports the proper line voltage for the
installation location before plugging it into the outlet.
G
ROUNDING INSTRUCTIONS
This Life Fitness product must be properly grounded. If the unit malfunctions or breaks down,
proper grounding provides a path of least resistance for the electric current, which reduces the
risk of shock to anyone touching or using the equipment. Each unit is equipped with an electrical
cord, which includes an equipment grounding conductor and a grounding plug. The plug must
be inserted into an outlet that has been properly installed and grounded in accordance with all
local codes and ordinances.
A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in
North America. If a properly grounded, 20-amp outlet is not available, one must be installed by a
qualified electrician. Models drawing 16 amps or more must be installed on a dedicated line.
IL EST ABSOLUMENT INTERDIT d'employer un adaptateur temporaire pour brancher cette
fiche sur une prise à deux pôles en Amérique du Nord. Si aucune prise de 20 A correctement
mise à la terre n'est disponible, il convient d'en faire installer une par un électricien qualifié. Les
modèles utilisant 16 A ou plus doivent être installés sur des lignes qui leur sont réservées.
DANGER: A risk of electrical shock may result from improper connection of the equipment-
grounding conductor. Check with a qualified electrician if in doubt as to proper grounding tech-
nique. DO NOT modify the plug provided with the product. If it will not fit an electrical outlet,
have a proper outlet installed by a qualified electrician.
DANGER: Un branchement incorrect du conducteur de mise à la terre peut entraîner des risques de
décharge électrique. Consultez un électricien si des doutes subsistent quant à la technique de mise à
la terre. NE MODIFIEZ PAS la fiche fournie avec l'appareil. Si elle ne s'adapte pas à une prise, faites
en installer une correcte par un électricien qualifié.
Supply
Voltage
(VAC)
100
50/60
50/60
50/60
50/60
50/60
50/60
120
200
8
8
8
8
16
16
220
230
240+
Frequency
(Hz)
Maximum
Current
(Amps)