Filter
Top Products
STEP 3:
FIGURE 3
6
• LOOSELY assemble the PIVOT FRAME (6) to the TOWER (1) using four 1/2 X 4” BOLTS (39), four 1/2” WASHERS (40) and three
1/2” LOCK NUTS (41) as shown in FIGURE 3.
0
1
2
3 4 5
6
1/2 1/2 1/2 1/2 1/2 1/2
• SECURELY TIGHTEN THE FRAME CONNECTIONS IN THE FOLLOWING ORDER:
1. LOWER CROSS SUPPORT (4) to the TOWER (1) and FRAME (2).
2. PIVOT FRAME (6) to the TOWER (1) and FRAME (2).
3. UPPER CROSS SUPPORT (5) to the TOWER (1) and PIVOT FRAME (6).
• LOOSELY assemble the UPPER CROSS SUPPORT (5) to the PIVOT FRAME (6) using two 1/2 X 4” BOLTS (39), two 1/2” WASHERS
(40), and one 1/2” LOCK NUT (41) while LOOSELY assembling the UPPER CROSS SUPPORT (5) to the TOWER (1) using two 1/2 X 3”
BOLTS (38), two 1/2” WASHERS (40), and one 1/2” LOCK NUT (41) as shown in FIGURE 3.as shown in FIGURE 3.
5
41
41
40
41
1/2 X 3” 38
1/2 X 4” 39
1/2 X 4” 39
39 1/2 X 4”
41
1
6
40
40
40
2
4