Filter
Top Products
FIGURE 15
15
STEP 15:
• SECURELY assemble two 4-1/2” PULLEYS (21) to the brackets on the FRAME (2) using three 3/8 X 2” BOLTS (32), one CABLE
RETAINING CLIP (25), and three 3/8” LOCK NUTS (37) as shown in FIGURE 16. (NOTE: Position the CABLE RETAINING CLIP
before tightening.)
• Make sure the CABLE (14) is routed around all pulleys as shown in FIGURE 16.
FIGURE 16
STEP 16:
• SECURELY assemble the swivel end of the CABLE (14) to the PIVOT ARM (7) using one 3/8 X 2-3/4” BOLTS (33), two 3/8” FLANGE
SPACERS (28) and one 3/8” LOCK NUT (37) as shown in FIGURE 16.
32 3/8 X 2”
37
25
37
21
2
14
33 3/8 X 2-3/4”
14
37
7
28