Filter
Top Products
13
FIGURE 12
• Place TOWER BRACE (8) over the GUIDE RODS (13) and SECURELY assemble TOWER BRACE (8) to TOWER (1) using two 1/2 X
4” BOLTS (39), two 1/2” WASHERS (40), and two 1/2” LOCK NUTS (41) as shown in FIGURE 12.
STEP 12:
40
41
8
39 1/2 X 4”
13
1
26
• Slide the 13/16” SHAFT COLLARS (26) to the top of the GUIDE RODS (13) and SECURELY tighten the SHAFT COLLAR (26) set
screws. See FIGURE 12.
FIGURE 11
STEP 11:
• SECURELY assemble two 4-1/2” PULLEYS (15) to the TOWER BRACE (8) using two 3/8 X 2” BOLTS (32), and two 3/8” LOCK
NUTS (37). See FIGURE 11.
37
32 3/8 X 2”
15
8