Filter
Top Products
9
ASSEMBLY STEP 4
SPRING WASHER (C)
15 mm
Qty: 4
FLAT WASHER (D)
15 mm
Qty: 4
BOLT (E)
15 mm
Qty: 4
HARDWARE BAG 4 CONTENTS :
BOLTS (E)
CONSOLE MAST
CONSOLE CABLES
WATER BOTTLE POCKETS
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
SPRING WASHERS (C)
FLAT WASHERS (D)
A Disengage the deck lock latch with your foot to
lower the running deck.
B Open hardware bag 4.
C Gently place the console on top of the console
masts. Attach the left side first using 2
bolts (e), 2 spring washers (c) and 2 flat
washers (d).
D Connect the console cables, carefully tucking
wires in masts to avoid damage.
E Attach the right side of the console using 2
bolts (e), 2 spring washers (c) and 2 flat
washers (d).
F Insert water bottle pockets into console.
G Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
NOTE: Be careful not to pinch any wires
while assembling the console.
YOU ARE FINISHED!