Horizon Fitness S.Class Series5 Treadmill User Manual


 
9
KNOW YOUR TREADMILL
TSC
2
CONSOLE
GRIP PULSE
HANDLEBARS
RUNNING BELT
TRANSPORT WHEEL
SIDE RAIL
MOTOR COVER
WATER BOTTLE
HOLDER
UPRIGHT
SUPPORT
TOUCH PAD
ROLLER
END CAP
S
.
Class Series
32
MAINTENANCE PROCEDURES
Cleanliness of your Horizon Fitness treadmill and its operating environment will
keep maintenance problems and service calls to a minimum. For this reason,
Horizon Fitness recommends that the following preventive maintenance schedule
be followed.
AFTER EACH USE (DAILY)
Turn off the treadmill with the on/off switch, and unplug the power cord from the
wall outlet.
WARNING!
To remove power from the treadmill, the power cord must be disconnected from
the wall outlet.
Wipe down the running belt, deck, motor cover, and console casing with a damp
cloth. Never use solvents, as they can cause damage to the treadmill.
Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
Make sure the power cord is not underneath the treadmill or in any other area
where it can become pinched or cut.
Check the tension and alignment of the running belt. Make sure that the tread-
mill belt will not damage any other components on the treadmill by being mis-
aligned.
EVERY WEEK
Clean underneath the treadmill, following these steps:
Turn off the treadmill with the on/off switch, then unplug the power cord at the
wall outlet.
Fold the treadmill into the upright position, making sure that the lock latch is
secure.
Move the treadmill to a remote location.
Wipe or vacuum any dust particles or other objects that may have accumulated
underneath the treadmill.
Return the treadmill to its previous position.
EVERY MONTH
Inspect all assembly bolts of the machine for proper tightness.
EVERY YEAR
It may be necessary to rewax your treadmill running deck and belt once a year
to maintain optimal performance of your treadmill. Please contact Horizon Fitness
with questions about applying wax to your treadmill.
Warning! Only use paraffin wax provided by Horizon Fitness!
Lubricate the air shocks with teflon based spray.
s.class MANUAL v1.0.qxd 2/19/2003 10:49 AM Page 10