Horizon Fitness S.Class Series5 Treadmill User Manual


 
TSC
2
11
CHOOSING THE TIME
Press SELECT and use the
+
or - buttons to set Time. Once the desired Time is
selected, press the START button. Select your desired speed using the + or -
(speed) buttons.
FINISHING A WORKOUT
When your workout is finished, the
treadmill console will beep twice and
‘END’ will be displayed in the Time win-
dow. Your workout information will stay
displayed on the console for 15 seconds
before it will reset.
PROGRAMMING
DISPLAY
SELECT
Used to view alternate information
such as Speed, Pulse, Laps, Elevation,
and Calories during your workout.
Note: The console will automatically
default back to show Time/Distance.
TIME
Shown as Minutes:Seconds. View the time
remaining or the time elapsed in your
workout.
S
.
Class Series
30
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over
the rollers, especially new treadmills. This noise will diminish over time, although
may not totally go away. Over time, the belt will stretch, causing the belt to ride
smoother over the rollers.
WHY IS THE TREADMILL I HAD DELIVERED LOUDER THAN
THE ONE AT THE STORE?
All fitness products seem quieter in a large store showroom because there is gen-
erally more background noise than in your home. Also, there will be less rever-
beration on a carpeted concrete floor than on a wood overlay floor. Sometimes a
heavy rubber mat will help reduce reverberation through the floor. If a fitness
product is placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder that a normal conver-
sational tone of voice, it is considered normal noise. If your treadmill is louder
than this, you may want to call the Horizon Fitness Customer Service Center @
1.888.993.3199. Sometimes an initial diagnosis can be made over the phone.
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our treadmill so lubrication is not needed. The
most important maintenance step is to simply wipe your perspiration off the
treadmill after each use.
HOW DO I CLEAN MY HORIZON FITNESS TREADMILL?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
COMMON PRODUCT QUESTIONS
MAINTENANCE
s.class MANUAL v1.0.qxd 2/19/2003 10:49 AM Page 12