Filter
Top Products
15
ASSEMBLY STEP 6
A Open HARDWARE BAG 6.
B Align end of LOWER LINK ARM with bracket on
bottom of LOWER HANDLEBAR.
C Place TEFLON WASHERS (V) on both sides of
the LOWER LINK ARM. While holding TEFLON
WASHERS (V) slide LOWER LINK ARM into
bottom end of LOWER HANDLEBAR.
D Secure the joint with 1 FLAT WASHER (W), 1
SPRING WASHER (B),1 BOLT (X) and secure
with 1 NUT (Y).
E Repeat steps B–D on the opposite side of the
elliptical.
SPRING WASHER (B)
15 mm
Qty: 2
TEFLON
WASHER (V)
28.4 mm
Qty: 4
FLAT WASHER (W)
17 mm
Qty: 2
NUT (Y)
Qty: 2
BOLT (X)
70 mm
Qty: 2
HARDWARE BAG 6 CONTENTS :
BOLT (X)
FLAT WASHER (W)
NUT (Y)
LOWER HANDLEBAR
SPRING WASHER (B)
TEFLON WASHERS (V)
LOWER LINK ARM