Filter
Top Products
BEFORE
YOU BEGIN
10
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
BIKE
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN
ASSEMBLY
11
INTRODUCTION
IMPORTANT
PRECAUTIONS
BIKE
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A S S E M B LY S T E P 5
WASHER (C)
19 mm
Qty: 2
BOLT (H)
20 mm
Qty: 4
WASHER (C)
19 mm
Qty: 2
BOLT (H)
20 mm
Qty: 4
ARC WASHER (G)
18 mm
Qty: 2
SPRING WASHER (I)
18 mm
Qty: 2
WASHER (G)
18 mm
Qty: 2
Side View
SPRING WASHER (I)
18 mm
Qty: 4
HARDWARE BAG 4 CONTENTS:
Open HARDWARE BAG 4.
Tie the CONSOLE WIRES to the PRE-ATTACHED ROUTING WIRE. Carefully pull CONSOLE WIRES through
CONSOLE MAST.
NOTE: Do not pinch wires.
Attach the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (H), 2 SPRING WASHERS (I) and 2 WASHERS
(C) on the front surface. Use 2 BOLTS (H) and 2 ARC WASHERS (G) on the CONSOLE MAST sides, as shown in
illustration.
A
B
C
A S S E M B LY S T E P 4
A
004721-00
Z01
;M8x1.25Px25L;
005145-A
Z02
B
;f8.2xf19.0x2.0t;
C
6
004755-00 Z06
;M8x1.25Px16L; ;
6
8
E
004382-00
Z07
;M5x0.8Px15L; ; ;
4
F
005165-00
Z04
;f8.2xf18.0x1.5t;
G
004733-00
Z05
;M8x1.25Px40L( 15L)
8
10
ARC WASHERS (F)
SEAT BACK
SEAT BASE
SEAT MECHANISM
BOLTS (E)
ARC WASHERS (F)
BOLTS (E)
Open HARDWARE BAG 3.
Attach the SEAT BASE to the SEAT MECHANISM using 4 BOLTS (E) and 4 ARC WASHERS (F), as shown in
illustration.
Attach the SEAT BACK to the SEAT MECHANISM using 4 BOLTS (E) and 4 ARC WASHERS (F), as shown in
illustration.
A
B
C
ARC WASHER (F)
15 mm
Qty: 8
BOLT (E)
45 mm
Qty: 8
ARC WASHER (F)
15 mm
Qty: 8
BOLT (E)
45 mm
Qty: 8
Side View
HARDWARE BAG 3 CONTENTS:
A
004721-00
Z01
005145-A
Z02
B
C
004755-00 Z06
E
004382-00
Z07
F
005165-00
Z04
G
004733-00
Z05
BOLTS (H)
BOLTS (H)
CONSOLE MAST
ARC WASHERS (G)
CONSOLE WIRES
MAIN FRAME
WASHERS (C)
SPRING WASHERS (I)
ASSEMBLY STEP 4: ASSEMBLY STEP 5:
B701_Rev.1.4.indd 10-11 7/29/08 9:21:31 AM