Filter
Top Products
BEFORE
YOU BEGIN
6
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
BIKE
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN
ASSEMBLY
7
INTRODUCTION
IMPORTANT
PRECAUTIONS
BIKE
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
TOOLS INCLUDED PARTS INCLUDED
c Phillips Screwdriver
c 5mm T Wrench
c 6mm T Wrench
c 13/15mm Flat Wrench
c 1 Console
c 1 Console Mast
c 1 Main Frame
c 1 Front Stabilizer Tube
c 1 Rear Stabilizer Tube
c 1 Seat Base
c 1 Seat Back
c 2 Pedals
c 2 Foot Straps
c 1 Handlebar Set
c 5 Hardware Bags
c 1 Water Bottle Holder
c 1 AC Adaptor
c 1 Audio Adaptor Cable
c 3 iPod Dock Inserts
c 1 Universal MP3 Player Dock Insert
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
CONSOLE
WATER BOTTLE HOLDER
MAIN FRAME
FRONT STABILIZER TUBE
UPPER HANDLEBAR
MAIN FRAME
SEAT MECHANISM
SEAT BACK
HANDLEBAR SET
SEAT BASE
SEAT ADJUSTMENT LEVER
REAR STABILIZER TUBE
PEDALS
CONSOLE MAST
iPOD
®
DOCKING STATION
CRANK ARMS
For a complete exploded diagram, visit us at www.horizonfitness.com
A S S E M B LY S T E P 1
A
004721-00
Z01
;M8x1.25Px25L;
005145-A
Z02
B
;f8.2xf19.0x2.0t;
C
6
004755-00 Z06
;M8x1.25Px16L; ;
6
8
E
004382-00
Z07
;M5x0.8Px15L; ; ;
4
F
005165-00
Z04
;f8.2xf18.0x1.5t;
G
004733-00
Z05
;M8x1.25Px40L( 15L)
8
10
MAIN FRAME
FRONT STABILIZER TUBE
REAR STABILIZER TUBE
BOLTS (A)
SPRING
WASHERS (B)
WASHERS (C)
BOLTS (A)
WASHERS (C)
SPRING
WASHERS (B)
WASHER (C)
19 mm
Qty: 4
BOLT (A)
25 mm
Qty: 4
WASHER (C)
19 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
BOLT (A)
25 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
HARDWARE BAG 1 CONTENTS:
ASSEMBLY STEP 1:
Open HARDWARE BAG 1.
Attach the REAR STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2
WASHERS (C).
Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2
WASHERS (C).
NOTE: Make sure to position FRONT STABILIZER TUBE so that wheels are on the front side of the bike, as
shown in illustration.
A
B
C
B701_Rev.1.4.indd 6-7 7/29/08 9:21:23 AM