Filter
Top Products
BEFORE
YOU BEGIN
8
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
BIKE
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN
ASSEMBLY
9
INTRODUCTION
IMPORTANT
PRECAUTIONS
BIKE
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A S S E M B LY S T E P 3
A
004721-00
Z01
005145-A
Z02
B
C
004755-00 Z06
E
004382-00
Z07
F
005165-00
Z04
G
004733-00
Z05
BOLTS (D)
MAIN FRAME
SEAT MECHANISM
WASHERS (C)
SPRING WASHERS (B)
HANDLEBAR SET
Open HARDWARE BAG 2.
Attach the HANDLEBAR SET onto the SEAT MECHANISM using 4 BOLTS (D), 4 SPRING WASHERS (B) and 4
WASHERS (C).
NOTE: Start by attaching top two bolts first, this will make assembly easier.
A
B
A
004721-00
Z01
;M8x1.25Px25L;
005145-A
Z02
B
;f8.2xf19.0x2.0t;
C
6
004755-00 Z06
;M8x1.25Px16L; ;
6
8
E
004382-00
Z07
;M5x0.8Px15L; ; ;
4
F
005165-00
Z04
;f8.2xf18.0x1.5t;
G
004733-00
Z05
;M8x1.25Px40L( 15L)
8
10
MAIN FRAME
RIGHT CRANK ARM
LEFT PEDAL
LEFT CRANK ARM
RIGHT PEDAL
A S S E M B LY S T E P 2
NOTE: There is no hardware bag for this step.
NOTE: The PEDALS will have stickers specifying which is left and right.
Match LEFT PEDAL with left FOOT STRAP.
With “L” on the strap facing outwards, insert FOOT STRAP into the loops on both sides of the pedal as
shown above.
Repeat with the RIGHT PEDAL and right FOOT STRAP.
Attach the RIGHT PEDAL onto the RIGHT CRANK ARM, tightening it CLOCKWISE with the provided
13mm/15mm FLAT WRENCH.
NOTE: The LEFT CRANK ARM is reverse threaded so it is very important that it is tightened COUNTER-
CLOCKWISE. Tightening it the opposite way can damage the pedal or the CRANK ARM or both.
Attach the LEFT PEDAL onto the LEFT CRANK ARM, tightening it COUNTER-CLOCKWISE with the provided
13mm/15mm FLAT WRENCH.
A
B
C
D
E
ASSEMBLY STEP 2: ASSEMBLY STEP 3:
WASHER (C)
19 mm
Qty: 4
BOLT (D)
16 mm
Qty: 4
WASHER (C)
19 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
BOLT (D)
16 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
HARDWARE BAG 2 CONTENTS:
LEFT FOOT STRAP
LEFT PEDAL
ASSEMBLY STEP 2-B:
B701_Rev.1.4.indd 8-9 7/29/08 9:21:27 AM