Filter
Top Products
KNOW YOUR UPRIGHT BIKE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important main-
tenance step is to simply wipe your perspiration off the bike after each use.
HOW DO I CLEAN MY HORIZON FITNESS UPRIGHT BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your Horizon Fitness upright bike and its operating environment will keep maintenance
problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the fol-
lowing preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
• Unplug the power cord from the wall outlet. (B30 only)
WARNING!
To remove power from the upright bike, the power cord must be disconnected from the wall outlet.
• Never use solvents, as they can cause damage to the upright bike.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness. (B30 only)
• Make sure the power cord is not underneath the upright bike or in any other area where it can
become pinched or cut. (B30 only)
EVERY WEEK
Clean underneath the upright bike, following these steps:
• Unplug the power cord at the wall outlet.
• Move the upright bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
upright bike.
• Return the upright bike to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
ROUTINE MAINTENANCE
CONSOLE
GRIP PULSE
SEAT
TRANSPORT
WHEEL
SIDE COVER
PEDAL
HANDLE BAR
CONSOLE
MAST
TENSION KNOB
FOOT PAD
FRONT FOOT
TUBE
POP PIN
SEAT RAIL
BOOT
REAR FOOT TUBE
9 HORIZON SERIES 32HORIZON SERIES
horizon B20_B30 owner’s guidev2.0.qxd 7/9/2003 11:11 AM Page 10