Filter
Top Products
KNOW YOUR UPRIGHT BIKE
Your Horizon Fitness upright bike is designed to be reliable and maintenance free. However, if you
do experience problems with your upright bike, please reference the troubleshooting guide listed
below.
PROBLEM: There is no display on the console.
SOLUTION: Remove the console and verify that the console cable is attached properly, making
sure that the cable is securely inserted into the console.
PROBLEM: The upright bike makes a squeaking or chirping noise.
SOLUTION: Loosen all bolts attached during the assembly process, grease the threads and tight-
en again.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION: Reset the console and allow the resistance to reset to the default position. Restart the
console and retry the resistance levels. (B30 only)
PROBLEM: There is no heart rate reading
SOLUTION: If you are using the chest strap, there may be a poor connection between the elec-
trodes and the skin. Remoisten the electrodes with water. (B30 only)
SOLUTION: The chest strap may not be positioned properly. Reposition the chest strap. It may be
necessary to experiment with the fit and position of the chest strap. (B30 only)
SOLUTION: Verify that the distance between the chest strap and the console is not beyond the rec-
ommended range of 36 inches. (B30 only)
SOLUTION: The battery in the chest strap may be dead. Take the chest strap to a jewelry store or
return to Horizon Fitness for a battery replacement. (B30 only)
TROUBLESHOOTING YOUR UPRIGHT BIKE
HEART RATE TROUBLESHOOTING
CONSOLE
GRIP PULSE
SEAT
TRANSPORT
WHEEL
SIDE COVER
PEDAL
HANDLE BAR
CONSOLE
MAST
FOOT PAD
FRONT FOOT
TUBE
POP PIN
SEAT RAIL
BOOT
REAR FOOT TUBE
13 HORIZON SERIES 28 HORIZON SERIES
SPEAKERS
horizon B20_B30 owner’s guidev2.0.qxd 7/9/2003 11:11 AM Page 14