Filter
Top Products
12
13
5
15
12
Handrail
Assembly
Pulse
Wires
89
88
Console
Assembly
11. With the help of a second person, hold the
Left and Right Handrails (81, 82) near the Base
(91). Insert the lower ends of the Handrails into
t
he holes in the top of the Right Base Cover (84)
and the Left Base Cover (not shown).
11
82
81
91
84
12. With the help of a second person, hold the
handrail assembly near the Left and Right
Uprights (88, 89) and connect the two pulse
wires. Carefully set the handrail assembly on
the console assembly. Make sure that the
brackets on the handrail assembly sit entirely
on top of the metal uprights and do not sit on
top of the plastic console assembly. Also, be
careful not to pinch the pulse wires.
Attach the handrail assembly to the Uprights (88,
89) with four 3/8" x 4 1/2" Patch Screws (5) and
four 3/8" Star Washers (13) (only one side is
shown); do not tighten the Patch Screws yet.
Then, attach the handrail assembly with two
5/16" x 1 1/2" Patch Screws (15); do not tighten
the Patch Screws yet.
Tighten the four 5/16" x 1 1/4" Patch Screws (4).
4
4