Filter
Top Products
9
5. With the help of a second person, hold the con-
sole assembly near the Uprights (85, 88).
Connect the 50" A/V Wire (80) and the 50" TV
Cable (81) to the A/V wire and the 40" TV Cable
(141) extending from the console assembly.
Connect the Upright Wire (86) to the console
wire extending from the console assembly. See
the inset drawing. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (86).
Remove the wire tie from the 50" TV Cable (81)
and the 50" A/V Wire (80).
Console
Assembly
5
88
85
81
141
80
Wire
Tie
Wire
Tie
A/V
Wire
Console Wire
86
86
Console
Wire
4. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly.
Identify the Left Accessory Tray (90) and the
Right Accessory Tray (100).
Attach the Left Accessory Tray (90) and the
R
ight Accessory Tray (100) to the console as-
sembly with eight #8 x 1/2" Screws (17).
17
4
17
Console
Assembly
100
90