Healthrider HRTL14508.0 Treadmill User Manual


 
26
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of the total distance that the walking belt has
moved and the total number of hours that the treadmill
h
as been used. The information mode also allows you
to select miles or kilometers to measure distance, and
to turn on and turn off the display demo mode.
To select the information mode, hold down the
Start/Stop button while inserting the key into the con-
sole and then release the Start/Stop button. When the
information mode is selected, the following information
will be shown:
The Time/Incline display will
show the total number of
hours the treadmill has been
used.
An “E” for English miles or an
“M” for metric kilometers will
appear in the Calorie/Pulse
display. Press the Speed in-
crease button to change the
unit of measurement if de-
sired.
The console features a dis-
play demo mode, designed
to be used if the treadmill is
displayed in a store. While
the demo mode is turned on,
the console will function nor-
mally when you plug in the power cord, switch the
reset/off circuit breaker to the reset position, and insert
the key into the console. However, when you remove
the key, the displays will remain lit, although the but-
tons will not function. If the demo mode is turned on, a
“d” will appear in the Calorie/Pulse display while the in-
formation mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
The Distance/Speed display
will show the total number of
miles or kilometers that the
walking belt has moved.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
s
tereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
s
ole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack labeled IN. Then plug the audio wire
into a jack on your MP3 player, CD player, or other
personal audio player. Make sure that the audio wire
is fully plugged in. While the audio wire is plugged in,
the television audio will not function.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player or press the
Volume increase and decrease buttons on the con-
sole. To use headphones, plug the headphones into
the headphone jack near the audio jack.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation as it tracks your heart rate during your workouts.
To purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.