Filter
Top Products
15
Follow your progress with the display.
See step 5 on page 12.
Measure your heart rate if desired.
S
ee step 6 on page 13.
Turn on the fan if desired.
See step 7 on page 13.
When you are finished exercising, remove the
key from the console.
When the program ends, make sure that the in-
cline of the treadmill is at the lowest setting.
Next, remove the key from the console and put it in
a safe place. Note: If the display remains lit
after the key is removed, the console is in the
“demo” mode. See page 24 and turn off the
demo mode.
When you are finished using the treadmill,
switch the on/off switch to the “off” position
and unplug the power cord.
H
OW TO USE A SPEED PROGRAM
I
nsert the key into the console.
S
ee HOW TO TURN ON THE POWER on page
12.
S
elect one of the speed programs.
To select one
of the speed
programs,
press the
Speed
Program but-
ton repeat-
edly. As each
speed pro-
gram is selected, the maximum speed setting of
the program will flash in the display for a few sec
-
onds. The display will also show how long the pro
-
gram will last. The matrix in the lower part of the
display will show the first seven speed settings of
the program.
Press the Start button or the Speed + button to
start the program.
Note: The speed program will function in the same
way as a speed & incline program, except the
speed program will control only the speed of the
treadmill. T
o change the incline of the treadmill
during the program, press the Incline increase
and decrease buttons.
When you are finished exercising, remove the
key from the console.
See step 7 at the left.
4
3
2
1
7
6
5
4