Filter
Top Products
7
2. Attach a Wheel (92) to the Base (85) with a 3/8"
x 2 1/4" Bolt (6) and a 3/8" Nut (5). Do not over-
tighten the Nut; the Wheel must turn freely.
2
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
t
he treadmill onto its left side. Partially fold the
Frame (54) so that the treadmill is more stable.
D
o not fully fold the Frame until the treadmill
is completely assembled.
Attach two Base Pads (88) to the Base (85) in
the locations shown with two #8 x 1" Tek
Screws (8) and two Base Pad Spacers (87).
Then, attach the other two Base Pads (88) to
the Base with two #8 x 1" Tek Screws (8). Do
not overtighten the Tek Screws.
1
85
54
8
88
88
87
6
5
92
85
88
8
8
88
8
87