Filter
Top Products
12
14. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see pages 26 and 27). To protect
the floor or carpet from damage, place a mat under the treadmill.
13. Raise the Frame (54) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (80) so that the large
barrel and the Latch Knob (81) are oriented as
shown.
Attach the Latch Bracket (89) and the Storage
Latch (80) to the Base (85) with two 3/8" x 2"
Bolts (2) and two 3/8" Nuts (5).
Attach the upper end of the Storage Latch (80)
to the bracket on the Frame (54) with a 3/8" x 2"
Bolt (2) and a 3/8" Nut (5). Note: It may be nec-
essary to move the Frame back and forth to
align the Storage Latch with the bracket.
Lower the Frame (54) (see HOW TO LOWER
THE TREADMILL FOR USE on page 24).
Large
Barrel
13
54
81
80
5
89
5
85
2
2
12. Identify the Left Accessory Tray (93) and the
Right Accessory Tray (94), which are marked
with an "L" and an "R" on the bottom.
Attach the Left and Right Accessory Trays (93,
9
4) to the console assembly with eight #8 x 5/8"
Screws (7). Do not overtighten the Screws.
Console
Assembly
12
94
7
7
93