Filter
Top Products
11
10. Partially tighten six 5/16" x 1" Bolts (12) with four
5/16" Star Washers (4) into the Right Upright
(112) and the console assembly as shown; do
n
ot tighten the Bolts yet.
R
epeat this step on the left side of the tread-
mill. Then, fully tighten the six 5/16" x 1"
Bolts (12).
Console
Assembly
1
0
12
112
4
12
11. Slide the Right Upright Cover (78) up against the
console assembly. Attach the Right Upright
Cover to the console assembly with three #8 x
3/4" Screws (1).
Attach the Left Upright Cover (not shown) in
the same way.
Console
Assembly
11
1
1
1
78