Filter
Top Products
22
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of the total number of miles or kilometers that the
walking belt has moved and the total number of hours
t
hat the treadmill has been operated. The information
mode allows you to choose an audio setting for your
iFit workouts. You can also select miles or kilometers
as the unit of measurement and turn on and turn off
the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
You can select an
audio setting if de-
sired. When you
use an iFit card, a
personal trainer will
guide you through
your workouts. If you select the ON setting next to IN-
STRUCTION, the personal trainer will give you de-
tailed instructions. If you select the PARTIAL setting,
your personal trainer will simply guide you through
your iFit workouts. To change the audio setting, press
the Incline decrease button.
The display will show the total number of hours the
treadmill has been used. The display will also show the
total number of miles (or kilometers) that the walking
belt has moved.
The word ENGLISH for miles or METRIC for kilometers
will appear in the display. Press the Speed increase
button to change the unit of measurement if desired.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
n
ormally when you plug in the power cord, switch the
reset/off circuit breaker to the reset position, and insert
t
he key into the console. However, when you remove
the key, the display will remain lit, although the buttons
will not function. If the demo mode is turned on, the
word ON will appear in the display while the informa-
tion mode is selected. To turn on or turn off the demo
mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the audio jack.
To use the audio wire, locate the audio wire and plug it
into the audio jack near the speakers. Then, plug the
other end of the audio wire into a jack on your MP3
player, CD player, or other personal audio player.
Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player or press the
Volume increase and decrease buttons on the con-
sole.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face and not on the console.