8
3. Identify the Right Upright (112), which is marked
with a “Right” sticker. Have a second person
hold the Right Upright near the Base (85) as
s
hown.
S
ee the inset drawing. Tie the wire tie in the
Right Upright (112) securely around the end of
the Upright Wire (79). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
3
112
Wire
Tie
79
85
79
4. Have a second person hold the Right Upright
(112) against the Base (85), with the Right
Upright positioned as shown. Be careful not to
pinch the Upright Wire (79).
Attach the Right Upright (112) to the Base (85)
with two 3/8" x 2 1/2" Bolts (10) and two 3/8"
Star Washers (9). Note: If the Bolt (A) hits the
#8 x 3/4" Screw (1) attaching the Base Cap
(86), loosen the Screw several turns.
Firmly tighten the 3/8" x 2 1/2" Bolts (10). If nec-
essary, retighten the #8 x 3/4" Screw (1).
4
10
85
9
112
79
86
A
1
79
112
Wire Tie