Filter
Top Products
10
7. Tighten two #10 x 1/2" Bolts (11) with two #10
S
tar Washers (3) into the Left and Right
Handrails (106, 107).
See assembly step 6. Tighten the four #8 x
3/4" Screws (1). Do not overtighten the
Screws.
7
Console
Assembly
11
3
11
3
1
07
106
8. Slide the Left Upright Cover (77) onto the Left
Upright (111) and the Right Upright Cover (78)
onto the Right Upright (112).
8
112
111
78
77
9. Have a second person hold the console assem-
bly near the Right Upright (112).
Connect the Upright Wire (79) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON. Remove the wire tie from the
Upright Wire. Insert the wires into the Right
Upright (112).
9
79
Console
Wire
Wire
Tie
112
Console
Assembly
79
Console
Wire