Filter
Top Products
Edge 500 Owner’s Manual 55
Appendix
Problem Solution
My Edge is connected
to the computer, but it
will not go into mass
storage mode.
You may have loaded a corrupted le.
1. Disconnect the Edge from your computer.
2. Turn off the Edge.
3. Press and hold MENU while you connect the Edge to your
computer.
Continue pressing MENU for 10 seconds or until the Edge
goes into mass storage mode.
I cannot see any new
removable drives in
my list of drives.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your
Garmin drives. See the Help le for your operating system to
learn how to assign drive letters.
My course le was
renamed.
You can load .tcx and .crs les to the Edge. When you select
the course for any reason, the le is converted to a .t course
le.
Some of my data is
missing from my
Edge history.
When the Edge memory is full, it will no longer record data.
Transfer data to your computer regularly to avoid losing data.
I need to replace the
bands for the mount.
Go to http://buy.garmin.com, or contact your Garmin dealer.
Purchase bands made of EPDM only.