Filter
Top Products
Edge 500 Owner’s Manual 11
Training with Your Edge
Using Auto Lap by
Position
You can use Auto Lap to automatically
mark the lap at a specic position.
This feature is helpful for comparing
your performance over different parts
of a ride (for example, a long climb or
training sprints).
1. Press and hold MENU.
2. Select Settings > Bike Settings >
Auto Lap.
3. In the Auto Lap Trigger eld,
select By Position.
4. Select an option:
Select Lap Press Only to
trigger the lap counter each time
you press LAP and each time
you pass any of those locations
again.
•
Select Start And Lap to
trigger the lap counter at the
GPS location where you press
START and at any location
during the ride where you press
LAP.
Select Mark And Lap to trigger
the lap counter at a specic GPS
location marked before the ride
and at any location during the
ride where you press LAP.
5. Customize optional lap data elds
(see page 37).
6. Go for a ride.
NOTE: During courses, use the By
Position option to trigger laps at all of
the lap positions saved in the course.
•
•