M10 Nylon
Locknut (77)
M8 Washer (103)
M8 Nylon
Locknut (78)
M6 Washer
(114)
O
M4 Washer
(104)
M6 Nylon
Locknut (107)
M4 x 12mm
Self-tapping
Screw (102)
M4 x 16mm
Self-tapping
Screw (110)
M6 x 20mm
Screw (88)
M8 x 22mm
Shoulder Bolt (90)
M10 x 75mm Button Screw (118)
M10 x 20mm
Button Screw (96)
19mm Spacer (67)
M10 Washer (80)
M10 Large Washer (105)
M12 Large Washer (98)
M10 x 70mm Bolt (113)
11mm Spacer (99)
13mm Spacer (109)
7mm Spacer (111)
21mm Steel Spacer (108)
89.5mm Spacer (59)
56.5mm Spacer (69)
M12 Nut (112)
PART IDENTIFICATION CHART
5
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.