Filter
Top Products
16
22. Wrap the Butterfly Cable (50) over a “V”-pulley
(47). Attach the “V”-pulley, a Long Cable Trap
(57), an M10 Washer (80), and two Guards (54)
to the Upright (2) with an M10 x 60mm Bolt (79)
and an M10 Nylon Locknut (77).
23.
Grease an M8 x 22mm Shoulder Bolt (90). Attach
the Butterfly Cable (50) to the Right Butterfly Arm
(29) with the Shoulder Bolt and an M8 Nylon
Locknut (78). See the inset drawing. Make sure
that the flat edge of the Cable is against the
Right Butterfly Arm.
22
57
50
2
77
54
54
47
80
79
23
90
50
29
78
Flat Edge
Grease
21. Wrap the Butterfly Cable (50) under a 90mm
Pulley (48). Attach the Pulley and two Half
G
uards (55) to the Double “U”-bracket (61) with
an M10 x 45mm Bolt (86) and an M10 Nylon
L
ocknut (77). M
ake sure that the Half Guards
are oriented as shown.
21
48
5
0
77
5
5
55
61
8
6