Filter
Top Products
13
13. Grease to the locations shown and attach the Left
Butterfly Bracket (28) to the Butterfly Frame (5)
with an M10 x 80mm Bolt (84) and an M10 Nylon
Locknut (77).
Repeat this step for the Right Butterfly
Bracket (29).
See steps 2–13. Tighten the Nylon Locknuts
(77, 78, 107).
14. Attach a Butterfly Handle (27) to the Left Butterfly
Arm (25) with an M10 x 65mm Button Bolt (106),
two M10 Washers (80), two 13mm Steel Spacers
(109), and an M10 Nylon Locknut (77).
Secure the Left Butterfly Arm (25) with an M10 x
82mm Button Screw (92) and an M10 Large
Washer (105).
Repeat this step for the Right Butterfly
Arm
and Butterfly Handle (26, 27).
13
5
84
77
29
28
14
26
27
77
80
27
80
106
109
109
105
92
25
Grease
12
103
78
118
103
100
4
5
6
12. Attach the Butterfly Frame (5) to the Top Frame
(4) with two M8 x 80mm Bolts (100), two M8
W
ashers (103), and two M8 Nylon Locknuts (78).
Do not tighten the Nylon Locknuts yet.
Attach the Butterfly Frame (5) to the Butterfly
Frame Brace (6) with an M10 x 75mm Button
Screw (118).