Filter
Top Products
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• For help identifying small parts, use the PART
IDENTIFICA
TION CHART
on page 5.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the system, make sure all parts
are oriented as shown in the drawings.
• Place all parts in a cleared area and remove the
p
acking materials. Do not dispose of the packing
materials until assembly is completed.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• One Allen wrench (included)
• Lubricant, such as grease or petroleum jelly.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
6
1
71
3
4
71
71
46
46
75
86
86
101
1.
Attach two Plastic Feet (46) to the Base Stabilizer
(3) with two M4 x 16mm Screws (86).
Attach the Base Stabilizer (3) to the Base (4) with
two M8 x 38mm Carriage Bolts (75), two M8 x
64mm Bolts (101), and four M8 Black Nylon
Locknuts (71).
2. Attach two Plastic Feet (46) to the Base Cover (5)
with two M4 x 16mm Screws (86).
Attach the Base Cover (5) to the Base Stabilizer
(3) and Base (4) with three M4 x 25mm Screws
(85).
2
5
4
3
46
46
85
85
86
86
Make Things Easier for Yourself
This manual is designed to ensure that the
resistance system can be assembled success-
fully by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
ASSEMBLY
Before beginning assembly, be sure that
you have read and understand the infor-
mation in the box above.