Filter
Top Products
24
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s
speakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Locate the audio wire. Plug one end into the audio jack
on the side of the console. Then, plug the other end
into a jack on your MP3 player, CD player, or other
personal audio player. Make sure that the audio wire
is fully plugged in.
Next, press the play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume level on your personal audio player or press
the Vol increase and decrease buttons on the console.
If you are using a personal CD player and the CD
skips, set the CD player on the oor or another at sur-
face instead of on the console.
Note: The USB port on the side of the console is for
rmware updates only.
HOW TO USE THE INTERNET BROWSER
Note: To use the browser, you must have access to
a wireless network including an 802.11b/n router with
SSID broadcast enabled (hidden networks are not sup-
ported).
To open the browser, touch the globe button near the
lower left corner of the screen. Then, select a website.
To return to the previous web page, press the back
button on the console or touch the Browser Back but-
ton on the screen. To exit the browser, press the home
button on the console or touch the Return button on
the screen.
To use the keyboard, see HOW TO USE THE TOUCH
SCREEN on page 16.
To enter a different web address in the URL bar, first,
slide your finger down the screen to view the URL bar,
if necessary. Then, touch the URL bar, use the key-
board to enter the address, and touch the Go button.
Note: While you are using the browser, the speed, in-
cline, fan, and volume buttons will still function, but the
workout buttons will not function.
If it is difficult to touch buttons on the screen, see
step 5 on page 24 and calibrate the screen.
Note: If you have questions after following these
instructions, go to www.iFit.com/support for
assistance.
HOW TO ADJUST THE CUSHIONING SYSTEM
Remove the key from the console and unplug the
power cord. The treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
treadmill. To increase the firmness of the walking plat-
form, step off the treadmill and slide the platform cush-
ions toward the front of the treadmill. To decrease the
firmness, slide the platform cushions toward the back
of the treadmill. Note: Make sure that both cushions
are set at the same firmness level. The faster you
run on the treadmill, or the more you weigh, the
firmer the walking platform should be.
Platform
Cushion
Walking Platform
Increase
Decrease
Platform
Cushion