Filter
Top Products
11
8. Raise the Frame (67) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (87) so that the large
barrel and the latch knob are in the positions
shown.
Attach the Storage Latch (87) to the bracket on
the Base (103) with a 3/8” x 2” Bolt (4) and a
3/8” Jam Nut (7).
Attach the upper end of the Storage Latch (87)
to the bracket on the Frame (67) with a 3/8" x 1
3/4" Bolt (3) and a 3/8" Jam Nut (7).
Lower the Frame (67) (see HOW TO LOWER
THE TREADMILL FOR USE on page 25).
7
7
Large
Barrel
103
4
67
3
87
8
Latch
Knob
Latch
Cap
9. With the help of a second person, raise the
front of the treadmill and insert the crossbar on
the Base (103) into the cutout in the cardboard
stand as shown. Have the second person hold
the treadmill to prevent it from moving for-
ward or backward.
Firmly tighten the four 3/8" x 3 3/4" Screws (5).
With the help of the second person, lower the
treadmill off the cardboard stand.
Cardboard
Stand
5
103
5
9
10. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). To protect
the floor or carpet from damage, place a mat under the treadmill. Extra hardware may be included.