Filter
Top Products
Step 6: Finish Up
1. Make sure the treadmill is leveled with the floor. Adjust it if necessary.
2. Plug your power cord in and turn ON the treadmill.
3. Make sure your safety key is in place.
600 Tm Owner’s Manual
9
Assembly Instructions
Step 5: Motor Cover Assembly
1. Place the Left motor cover onto the left side of frame.
2. Insert and tighten the self-tap M5 x 10mm screw into the center and top
mounting hole using Phillips screwdriver.
3. Insert and tighten two M5 x16 on front and rear end of the cover using
Phillips screwdriver.
4. Repeat procedure 1, 2 & 3 for Right motor cover.
Use open wrench to
adjust the leveling
pad here.
600tmOM 8/24/06 11:17 AM Page 11