Filter
Top Products
36
500 Tm Owner’s Manual
Workout Programs (continued)
h
eart rate”. Press “Select” button to switch the data displays.
• Time display will show the selected program time and count down.
• Incline display will start with incline of 0%.
• Heart Rate display:
o If there is no pulse input, the Heart rate data display will show “ - - -“ and
blink. If there continues to be no pulse input, this console will maintain its
current resistance setting and not changing until the program ends or is
changed.
o If there is a valid pulse, the Heart rate display will show the actual pulse
reading.
Adjustment
• Computer will adjust the speed to achieve your Heart rate goal; therefore speed
can not be adjusted during program run mode.
• Press Speed ”UP/DOWN” key will adjust the target HR goal.
o Press Speed “UP/DOWN” key during Rest HR segment to adjust the
Rest HR setting of the remaining program. The Pulse window will blink the
Rest HR setting and adjust. Until the adjustment is done, it then will resume
to display actual HR. Dot matrix window will update the Rest %Max HR pro
file accordingly.
o Press Speed “UP/DOWN” key during Work HR segment to adjust the
Work HR setting of the remaining program. The Pulse window will blink the
Work HR setting and adjust. Until the adjustment is done, it then will resume
to display actual HR. Dot matrix window will update the Work %Max HR
profile accordingly.
• The numeric quick key can not be used to adjust the target HR setting during
program run mode.
• Press Incline “UP/DOWN” key to adjust the incline from 0 -15%. The
incline display will update the current & future incline and the dot matrix win
dow will update the incline profile if this display is selected.
• Press “SELECT” key next to dot matrix window to switch the profile display.
Ending the Program
• When selected program time is up, this program will end and Cool down will
be active. See Cool down section for details.
• If STOP key is pressed twice during program run mode, the cool down mode
will end and enter workout summary mode.
• There will be a beep sound to indicate the program ended.
Pause, Reset, Restart, or Switch the program
See Console section for details.
500tmOM 8/24/06 11:19 AM Page 38