Filter
Top Products
8. SWITCHING ANALOG TIME AND DIGITAL TIME
This watch is able to switch between analog time display and digital time display.
<Switching Procedure>
1. Turn the crown to set the mode hand to the time [TME) mode.
2. Press button (A) and (B) simultaneously.
3. After a confirmation tone sounds, the watch switches the time of the city displayed by analog display and
the time of the city displayed by digital display.
If buttons (A) and (B) are simultaneously pressed when in the calendar [CAL] Mode, the watch switches the
date of the city displayed by analog display and the date of the city displayed by digital display (the times are
switched at this time as well).
9. SETTING THE TIME (TIME IS CORRECTED BY DIGITAL DISPLAY)
When digital time is corrected, the second, minute, hour, 24 hour and UTC hour and minute hands of the
analog time are corrected automatically in conjunction with digital time.
1. Turn the crown and set the mode hand to the time [TME] mode.
2. Press either button (A) or button (B) to access the city to be corrected.
3. When the crown is pulled out to the second click (time setting position), the watch enters the
time correction state.
4. When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the
location to be corrected. (The location that is flashing is the location that can be corrected.)
• When button (B) is pressed in the [SMT] daylight savings time correction state daylight savings time can
be set (ON) or canceled (OF).
• "Seconds" return to zero when button (B) is pressed in the "seconds" correction state.
• When the crown is turned forward (clockwise) in the "hour" or "minute" correction states, correction is
made in the positive direction. Turning the crown continuously allows "hours" or 11 minutes" to be
corrected continuously. Although correction can be made in the negative direction when the crown is
turned backward (counter-clockwise), always make sure to turn the crown forward to ensure that the time
is set correctly.
• Switching "12H/24H time" is performed by pressing button (B).
5. After corrections have been completed, return the crown to the normal position
Return to Table of Contents
Return to Table of Contents