Filter
Top Products
[Time Setting Warning Function]
(Analog Display)
The watch stops when insufficient charging
continues for about 1.5 days. When the watch
is charged by exposing to light after having
stopped due to insufficient charging, each
hand is rapidly advanced to the base position
and stops. Each hand remains stopped until
the time is reset.
(Digital Display)
The initial setting display (12 hours, 00 minutes, 00 seconds, UTC or January 1 SA) flashes in the time or
calendar mode.
<Canceling the Time Setting Warning Function>
1 .Set the mode hand to the time mode and pull the crown out to the second click to set the time. Flashing of
the digital display is only canceled in the time mode. After correcting the time, return the crown to the normal
position.
2. Set the mode hand to the calendar mode and pull the crown out to the second click to set the
date. Flashing of the digital display is canceled in the calendar mode. 3. After correcting the date, return the
crown to the normal position.
Note:
x The time setting warning function will not be canceled unless the time is first set followed by setting the
date.
x It takes a minimum of 30 minutes until the watch switches to the time setting warning display after the
watch has stopped due to insufficient charging even if the watch is exposed to light.
[Overcharging Prevention Function]
The overcharging prevention function is activated when the secondary battery is fully charged so that it is not
charged further. This allows the user to charge the watch without any risk of overcharging.
Return to Table of Contents
Return to Table of Contents