Filter
Top Products
[Manual Power Save]
When not using the watch for an extended period of time, activating the manual power save function after first
charging the watch until all three bars of the graphic display of the secondary battery charge indicator are lit
enables the watch to be stored for a longer period of time. Furthermore, do not charge the watch while the
manual power save function is activated. First cancel the manual power save function before charging.
<Setting Manual Power Save>
The manual power save function is activated by setting the city name to "C65" and the time difference to "O"
while following the procedure described in “<Registration of Arbitrary City and Time Difference>” in section 14
on Using Zone Setting, and then returning the crown to the normal position.
(Analog Display)
• Each hand stops moving at its current location.
(Digital Display)
• The entire digital display is not lit.
Notes:
• None of the button operations function in any mode.
• The mode does not change even when the mode hand is attempted to be moved by turning
the crown.
<Canceling Manual Power Save>
Each hand rapidly advances to the current time and Manual Power Save is canceled when the crown is pulled
out to the second click.
Return the crown to the normal position after canceling the manual power save function. -P Each hand rapidly
advances to the current time and begins to move.
The digital display reappears simultaneous to resumption of power generation, and the alarm sounds for the
set duration. However, the chronograph returns to the reset state and the timer switches to the initial setting
display.
[Charge Indicator]
The charge indicator provides a simple graphic indication in digital display area 2 of the amount of charge
remaining in the secondary battery.
<Interpretation of Secondary Battery Charge Levels>
Fully charged Sufficiently charged Low charge Hardly any charge
When none of the bars of the graphic display are lit, the secondary battery has essentially become completely
discharged and the second hand begins two-second interval movement. Since the watch will stop due to
insufficient charging if this state continues for about 1.5 days, sufficiently charge the watch by exposing to light.
Return to Table of Contents
Return to Table of Contents