Filter
Top Products
5. SWITCHING THE MODE (DISPLAY FUNCTIONS)
In addition to the time and date modes, this watch is also equipped with three additional modes consisting of
the alarm, chronograph and timer modes. The mode can be switched by turning the crown. Check the current
mode with the mode hand.
<Switching the Mode>
6. CHECKING O-POSITION OF EACH HAND
Before using this watch, check that the 0-position (based position of each hand) is set correctly to ensure that
the functions of the watch operate properly by performing the following procedure.
<O-Position Check>
1. Turn the crown while in the normal position to set
the mode hand to the chronograph [CHR) mode.
2. Pull the crown out to the second click (O-
position correction position). The second hand,
minute hand, hour hand, 24-hour hand, UTC
hour hand and UTC minute hand rapidly advance
to the 0-position (12:00 position).
Note:
When each hand is not at the 0-position, perform the
"O-position correction" procedure. If this 0-position is
out of alignment, each hand will not indicate the
correct position.
Return to Table of Contents
Return to Table of Contents