Filter
Top Products
13. USING THE TIMER
The timer can be set to a maximum of 99 minutes in 1-minute units. When the set time has elapsed, a tone
indicating that the set time is up sounds for about 5 seconds, after which the timer returns to the timer initial
setting display.
<Timer Initial Setting Display> <Setting the Timer>
1. Turn the crown to set the mode hand to the timer
[TMR] mode.
2. Pull out the crown to the second click (timer
setting position) to enter the "minutes" correction
state.
3. When the crown is turned forward (clock- wise) in
the "hours" or "minutes" correction state, correction
can be made in the positive direction. When the
crown is turned backward (counter-clockwise),
correction can be made in the negative direction.
4. After setting, return the crown to the normal
position.
<Using the Timer>
1. Press button (A) to start the timer.
2. Pressing button (A) again during measurement stops the timer.
3. Pressing button (B) during measurement returns the watch to be timer initial setting display and resumes
measurement.
4. Pressing button (B) when the timer is stopped returns the watch to the timer initial setting display.
Return to Table of Contents
Return to Table of Contents