Filter
Top Products
Bowflex Xtreme
®
2 SE Assembly Manual
13
Step 14 Ab Crunch Station Assembly
Parts:
• Ab Crunch Bracket
• Ab Cross Bar
Hardware (1:1):
• 2 Button Head Screws (3/8
" X 2 3/4")
• 4 Washers (3/8
")
• 2 Nylock Nuts 3/8 -16
Tool: 7/32" Hex Wrench
14-1 Attach the Ab Cross Bar to the Ab Crunch
Bracket as shown. Tighten all hardware.
from this step.
Assembly Guide
Ab Bracket
Ab Lat Cross Bar
Flat Washer
Lock Nut
Button Head Screw
Step 13 Upper Lat Tower Assembly
Parts:
• Upper Lat Tower
• Lat Cross Bar
• Rear Lat Crossmember
Hardware:
• 2 Button Head Screws (3/8" X 3")
• 2 Washers (3/8")
• 2 Nylock Nuts (3/8”)
• 2 Button Head Screws (1/2" X 5 1/4")
• 2 Wide Washers (1/2")
• 2 Nylock Nuts (1/2”)
Tool: 7/32" Hex Wrench and Adjustable Wrench
13-1 Align the two holes on the Lat Cross Bar with
those on the Upper Lat Tower as shown.
13-2 Attach using 3/8” screws, washers and nuts as
shown.
Note: Do not tighten hardware at this time.
13-3 Align the bracket on the Rear Lat Crossmember
with the bolt on the Upper Lat Tower as shown.
13-4 Attach using 1/2” screws, washers and nuts as
shown.
13-5 Tighten all hardware from this step.
3/8" Button
Head Screw
3/8" Washer
Lat Cross Bar
Upper Lat
Tower
3/8" Nut
1/2"
Washer
1/2" Button
Head Screw
1/2" Nut